Eyewash, Faucet Mount, Adjustable Outlet Heads, Prime Industries Inc, EW101

Item: 91-4820-01-EA

Description

WaterSaver® EyeSafe-X™ Faucet-Mounted Eyewash with Adjustable Aerated Outlet HeadsApplication:
  • Convert any faucet into an emergency eyewash station without interfering with normal faucet operation
  • Install at sink, close to where accidents might occur
  • In an emergency, unit is quickly located and activated
  • Provdies an unlimited supply of potable water for rinsing the user's eyes
Outlet heads:
  • Outlet heads are mounted 5"" apart and deliver a soft, aerated flow of water
  • Angle of heads is adjustable to permit full coverage and avoid splashing
  • Furnished with float-off dust covers to protect outlet heads
Valve:
  • Forged brass diverter valve
  • Pull knob to activate eyewash
  • Water pressure holds eyewash in operation leaving user's hands free
  • Push knob or turn off faucet to return to normal facet operation
Inlet:
  • Body has 55/64""-27 female thread
  • Furnished with three adaptors:  15/16""-27, 13/16""- 17 and 3/8"" IPS for installing on most commonly used faucets including laboratory-type faucets
Outlet:
  • Furnished with removable aerator on bottom
Quality Assurance:
  • Each unit is completely assembled and water tested prior to shipment
Important:  Faucet-mounted eyewashes, whether manufactured by WaterSaver Faucet or other companies, require two motions to operate (turn on water, pull knob to activate eyewash flow).  Therefore, WaterSaver Faucet does not believe that these units meet the provisions of ANSI Z358.1-2014 as eyewash units.  These units are inteded solely as supplemental units in addition to dedicated, plumbed eyewash equipment installed in the workplace.Caution:  Faucet-mounted eyewashes should be used with cold or warm water only.  Use of hot water might cause scalding.

You may also like