Holmes #401XLB1-FC, Crusher 10 x 15, 7-1/2 H.P., 220 V/3 PH/50 Hz

Model 401XLB1 has a capacity of 4000 pounds per hour using a 3/8" diameter perforated screen plate; 2500 pounds using a 3/16" diameter screen. It is recommended for crushing 6-inch and smaller material to minus-4 mesh.

Features

• The covered feed hopper with a capacity of 1.6 cubic feet (70 lb) has a manual-feed control gate.
• The cast ductile iron-crusher housings are hinged and latched for quick access.
• Stressing safety in operation, its open latch sensor cuts power to the motor.
• The rotor swing-hammers are heat-treated and hardened.
• Rotor assemblies are reversible (end-for-end) for maximum hammer life.
• Screen plates have round-hole perforations. Available perforation diameters are (in inches) 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 3/4, and 1.
• The container is sealed to the discharge spout while crushing.
• The Nema-12 magnetic starter provides a 120-volt control circuit and overload protection for the 7-1/2 HP, TEFC motor, 220V, 3 phase, 50Hz motor.
• The rotor speed is 1260 rpm.
• Overall Size: 56"H x 36"W x 39 1/2"D; Shipping Weight: 840 lb
• The crusher is mounted on four 4-inch diameter casters.
• Wired to NEC standards. Other wiring configurations are available.

Supplied with

• Two screen plates
• About 10 feet of cable to connect to the power source.