Description
Myron L® DS Meter™ Conductivity Meter, 0-5,000 Microsiemens (or Micromhos)/cm, Model 512M5DS Meter™ Conductivity Meters provide fast, accurate, on-the-spot measurements of conductivity in water. This handheld instrument may be used to monitor impurities in industrial, commercial or natural source waters that can contribute to scale, corrosion, poor taste, or environmental pollution effecting animal and plant life. Readings from the highly stable circuitry help assure product quality, prevent equipment damage or failure, and verify in-line instrumentation.Breakage is one the major causes of sensor failure in a typical conductivity instrument. The DS Meter™ electrode has maximum protection inside the cell cup. The lighweight and compact, yet durable, field-tested design places these instruments among the world's most reliable and should provide years of rough field service with reliability, accuracy, and simplicity.Applications:
- Boilers & Cooling towers
- Deionization
- Reverse osmosis
- Chemical concentrations
- Printing fountain solutions
- Swimming pools & spas
- Water polution control
- Wastewater
| Conductivity range | 0-5,000 micromhos (M)/cm or 0-5,000 microsiemens (S)/cm; also in ppm |
| Range | Single |
| Display | 2-1/2 in. Taut-band shock-resistant meter; Analog |
| Accuracy | ± 2% full scale |
| Repeatability | ± 1% |
| Temperature compensation | Automatic (to 25 °C / 77°F) for conductivity samples between 10-71 °C / 50-160 °F |
| Cell cup material | chip and crack-resistant polyethylene |
| Powered by | Single 9 volt battery (included) |
| Battery Life | > 2000 tests or 1 year) |
| Conductivity Electrode | Built-in: never needs re-platinizing |
| Calibration | Minimal due to very stable circuitry; internal standard for easy field conductivity calibration and range doubling |
| Dimensions | 3.4" W x 4.5" D x 4.0" H / 86 mm W x 114 mm D x 102 mm |
| Weight | 1 lb / 0.45 kg |