Description
Hanna Instruments® Portable pH/EC/TDS/Temperature Meter with CAL Check and 3-in-1 Probe, HI9813-6
Features:
- Easy-to-use, water-resistant portable meter
- Measures pH, conductivity (EC), total dissolved solids (TDS) and temperature with 3-in-one probe
- Equipped with CAL Check™ to indicate when probe needs calibrated or replaced
- Dedicated buttons for measurement modes and knobs for single-point calibration
- Variable TDS conversion factor for accurate results
- Large LCD displays pH, EC, TDS, or temperature readings along with tutorial instructions
- Basic pH/EC/TDS meter that is calibrated manually to a single point with the use of two trimmers
- pH is calibrated to pH 7.01
- EC/TDS is calibrated to either 1.41 mS/cm (1413 µS/cm) or 1500 ppm
- LCD screen has battery life indicator as well as on-screen tutorial messages
- Ideal meter for agriculture, greenhouse, and hydroponics
Supplied with:
- HI1285-6 probe is a polypropylene body, amplified pH electrode with a built-in EC/TDS and temperature sensors (amplifier for the pH electrode prevents interference from humidity and electrical noise from common sources including motors, ballasts, or pumps)
- HI70007 pH 7.01 buffer solution sachet (1)
- HI70442 1500 ppm calibration solution sachet (1)
- HI70031 1413 µS/cm calibration solution sachet (1)
- HI700661 electrode cleaning solution sachets (2)
- HI50021 calibration check solution sachets (2)
- 9V battery
- Instructions
- Rugged carrying case
Specifications:
| pH Resolution | 0.1 pH |
| pH Accuracy (@25 °C/77 °F) | ±0.1 pH |
| pH Calibration | manual, one point |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy (@25 °C/77 °F) | ±0.5 °C |
| EC Resolution | 0.01 mS/cm |
| EC Accuracy (@25 °C/77 °F) | ±2% full scale |
| EC Calibration | manual, 1-point through trimmer |
| TDS Resolution | 1 ppm (mg/L) |
| TDS Accuracy (@25 °C/77 °F) | ±2% F.S. |
| TDS Conversion Factor | Variable based on reading from 0.56 to 0.72 according to the TDS 442 curve for natural water |
| Temperature Compensation | with β=2%/°C typical |
| Power Supply | 1 x 9V alkaline battery |
| Power Consumption | approximately 150 hours of continuous use |
| Recommended Probe | HI1285-6 polypropylene body, pre-amplified multiparameter probe with internal temperature sensor and Cal Check™, DIN connector and 1 m cable |
Specifications
| Range | pH: 0.0 to 14.0 |
|---|---|
| Range | Temperature: 0.0 to 70.0 degrees C |
| Range | EC: 0.00 to 4.00 mS/cm |
| Range | TDS: 0 to 1999 ppm (mg/L) |
| Power | 1 - 9 V battery |
| Other | Waterproof |
| Dimensions | 145 x 80 x 36 mm (5.7 x 3.1 x 1.4 in.) |
| Weight | 230 g (8.1 oz) |
| Manufacturer | Hanna Instruments |
| Model No | HI9813-6 |
| Warranty | 2 years |
SDS PDFs
It is our policy to provide the latest Safety Data Sheet (SDS) for all chemicals we ship. Each shipment will contain copies for every chemical contained in the shipment, and for any chemical included in an instrument kit or calibration kit.
Contact us for additional copies of an SDS or for a copy of the Certificate of Analysis:
Phone: 1-800-624-8285
Email: INFO_SDS@preiser.com